Amorphous Core Transformer

Sottostazione trasformatore

Amorphous Core Transformer

An amorphous core transformer attacks the loss a transformer suffers merely by staying energised. Its ribbon of amorphous metal magnetises far more easily than grain-oriented steel, so no-load losses fall dramatically — and wherever a unit sits on the network around the clock, that saving compounds into serious money, year after year, for decades.

We build amorphous core distribution transformers for utilities and operators who evaluate equipment on total owning cost rather than first price, winding the low-loss core into your specified rating, losses and tank format. The plant behind this site has delivered 4,000+ electrical projects since 2010, with routine tests on every unit shipped.

Richiedi un preventivo

Key Specifications & Options

The configuration below reflects the options we build to order for amorphous core transformers. Every parameter can be adjusted to match your drawings and site conditions — send us your requirements and our engineers will confirm what applies to your project.

ParametroOptions / Typical Range
Core materialIron-based amorphous alloy ribbon
Rated powerTypical distribution ratings from 50 to 2,500 kVA
No-load lossTypically 60–70% below conventional CRGO designs of equal rating; standard tables govern guaranteed figures
Voltage classDistribution class up to 36 kV primary
Tank formatOil-immersed sealed tank typical; other formats engineered per project
Duty profileStrongest return where the transformer is energised continuously (24/7 network duty)
Standards & efficiencyIEC 60076 / IEEE C57 design rules; DOE and EU Ecodesign efficiency tiers met for regulated markets
Evaluation supportA / B / C loss-capitalisation formulas applied at quotation on request

Domande frequenti

How much lower are amorphous core no-load losses really?

The physics is settled: amorphous ribbon reverses magnetisation with far less energy than grain-oriented steel, which typically pushes no-load losses down by some 60–70% against an equivalent CRGO design. The guaranteed figure for your specific rating is stated in the offer against the standard loss tables — we put the comparison in writing rather than leaving it to marketing.

When does the amorphous premium pay back?

Payback tracks the hours the transformer stays energised. Continuously energised distribution duty — the normal case — typically recovers the premium within a few years and then keeps saving for the rest of a 20–30 year service life. Backup or seasonally loaded units may never recover it; we run your loading profile through the evaluation before recommending the core.

Are amorphous transformers less tolerant of overload?

The core is not the limiting element under load — windings and insulation are, exactly as in conventional designs — so overload handling follows the same standard loading guides. What differs is mechanical sensitivity of the ribbon in handling, which our winding process accounts for. Specify your duty cycle and the design margins are set to it.

Can you support a total-owning-cost evaluation in the quotation?

Yes — send your A, B and C loss capitalisation factors (the value you assign to each kilowatt of no-load and load loss) and we return the offer with the TOC calculation for amorphous versus CRGO alternatives, so the purchasing decision rests on lifetime numbers.

Related Guides