落地式电气箱

落地式电气箱

落地式电气箱

  • 所有落地式 NEMA 机柜都包括一个白色粉末涂层低碳钢后面板。
  • 低碳钢外壳涂有 ANSI 61 灰色粉末涂层。
  • 不锈钢和铝合金外壳表面经过拉丝处理。
  • Poron 垫片可实现防水防尘密封。
  • 有可拆卸的吊眼螺栓，用于吊装。
  • 外壳和门上的接地螺柱均符合 UL508A 标准

Floor mount electrical enclosures carry the loads wall boxes cannot: larger switchgear groupings, drives, transformers, and control hardware that need a stable base, generous cabling room, and top or bottom entry from cable trenches. Standing on an integral base plinth, they anchor the electrical architecture of plant rooms, substations, and process skids.

We manufacture floor mount enclosures and cabinets from steel, stainless, and aluminum sheet, with base frames, door configurations, and interior fit-out built to order. ElectricalCabinet has built electrical enclosures since 2010, delivering more than 4,000 projects for industrial clients. Our fabrication covers CNC punching, bending, and welding, with custom cutouts, sizes, and surface finishes built to your drawings. Typical builds range from single-bay control cabinets to multi-bay line-ups joined on site.

获取报价

什么是落地式电气箱？

落地式 NEMA 电气柜是全封闭式电气柜，带有支脚，可以立在平面上。支腿可以抬高机柜，使机柜下方的通道畅通无阻。安装可以很简单，只需将柜腿固定在地板上即可，几乎不会影响柜子的完整性。

地面安装结构部件的电气外壳

落地式电气柜包含各种不同功能的组件。

这包括以下内容

1.单门和对开门。

落地式电气柜有单柜和双柜两种配置。

双前置机柜包括一个可选的可拆卸中柱，方便进出，尤其是在安装大型设备时。

2.连续铰链。

这些坚固耐用的铰链安装在机柜门上。要摆动和打开机柜门，必须有足够的转动空间。不过，它还能容纳所有电子线、电线和其他组件。

3.转舌锁

这些组件在落地式电气柜中很常见。

4.螺丝夹。

螺钉夹是落地式电气外壳的主要介质。其目的是将外壳牢固地固定在混凝土地面上，并提供坚固的支撑。

构成落地式电气柜的其他组件如下：

  • 垫圈
  • 内板
  • 密封盖板
  • 提升垫眼
  • 接地螺柱
  • 机架式导轨
  • 窗户套件
  • 闩锁机制
  • 安全硬件 (包括挂锁、锁扣、防篡改螺栓、锁等）。

落地式电气箱的应用

落地式电气柜专为工业和汽车应用而开发。

它非常适合用于专门的防护应用，例如

  • 外壳电机启动器
  • 承包商
  • 驱动器
  • PLC
  • 电子设备和机械系统
  • 视频监控系统
  • 无线监控系统
  • 闭路监控系统
  • 电缆集成和分配系统
  • 网络集成系统
  • 电子监控系统
  • 远程监控系统

定制落地式电气箱

我们认识到每种应用都是独一无二的，因此我们提供定制的电气外壳。我们的工程师将与您通力合作，为您量身定制符合您具体规格的外壳。从原型设计到规模制造，我们都能为您的应用提供理想的解决方案。
向我们提供您的图纸构思和参数，我们将为您量身定制最适合您需求的落地式电气外壳。我们可以为您提供一次性改造或持续支持。

立即联系我们

落地式电气外壳的材料

304 不锈钢落地式安装机柜

304 不锈钢落地式安装机柜

316 不锈钢落地式安装机柜

316 不锈钢落地式安装机柜

铝制落地式安装机柜

铝制落地式安装机柜

碳钢落地式安装机柜

碳钢落地式安装机柜

相关外壳安装类型

壁挂式电气箱
壁式安装外壳
金属嵌入式电气外壳
嵌入式安装外壳
独立式电气柜
独立式围墙
接线盒电气外壳
接线盒外壳
杆式安装电气箱
杆式安装外壳

Key Specifications & Options

The configuration below reflects the options we build to order for floor mount electrical enclosures. Every parameter can be adjusted to match your drawings and site conditions — send us your requirements and our engineers will confirm what applies to your project.

ParameterOptions / Typical Range
Material optionsPowder-coated carbon steel, 304/316 stainless steel, aluminum
Typical size rangeSingle-bay to multi-bay line-ups; heights commonly 1200–2000 mm
Base constructionIntegral base plinth for floor fixing and forklift handling
Protection ratingIP54 to IP66 executions; outdoor versions with rain roofs and plinth sealing
Door optionsSingle or double doors, rear access panels, lockable handles
Cable entryTop and bottom entry with removable gland plates
Interior hardwareMounting plates, 19-inch frames, DIN rails, busbar chambers on request
Typical applicationsPlant rooms, motor control centers, pump stations, process skids, compact substations

常见问题

Does a floor mount enclosure need a special foundation?

A level concrete floor or prepared steel base is normally sufficient — the base plinth distributes the load and carries the fixing points. For multi-bay line-ups we supply base alignment data so the sections join cleanly on site.

Can floor mount enclosures be joined into a lineup?

Yes. Bays are built with matching joining faces and removable cover strips so several cabinets form one continuous suite — standard practice for motor control centers and distribution rows.

Floor mount or free-standing — what is the difference in practice?

The terms largely overlap: our floor mount line emphasizes bolted-down cabinets with base plinths, while free-standing executions focus on self-supporting bodies with removable sides. Selection comes down to anchoring needs, side access, and internal layout — we advise per project.

How is cable entry handled on floor cabinets?

Removable top and bottom gland plates allow site-drilled or pre-machined entries. Tell us the cable schedule and we pre-machine the plates and fit glands before shipping.

Related Guides